Hot Water Service Replacement Sydney & Central Coast

25 Jan

hot water service replacement

No hot water? Do you want to save money on your household bills? Are you always running out of hot water? Is your hot water system leaking? We are the hot water service replacement experts and service all Sydney suburbs and Central Coast.  Our trucks are on the road right now ready to attend to all your hot water heater replacement problems.

Did you know that heating water comprises approximately 25 per cent of household energy use in Australia. Hot water is the second largest consumer of household energy use, after space heating and cooling.  More than half of all hot water use is in the bathroom, a third in the laundry and the remainder in the kitchen.

With statistics like these, it makes sense to be smart and replace your old hot water heater with a more economical and environmentally friendly hot water service. Not only will you never run out of hot water but you’ll save money on your household bills and enjoy trouble free hot water usage for many years to come.

The benefits of our hot water system replacement service

Competitive Pricing | Free Delivery | Huge Range

Customer discounts – As one of Australia’s largest suppliers of water heaters we have enormous buying power and happily pass our supplier discounts on to our customers. We will beat any genuine quote today! Call us on 1800 266 999 for a hot water service replacement quote today or complete our online quote form.

Free delivery – We offer free water heater delivery to all Sydney suburbs and Central Coast. We will also offer complimentary removal of your old water heater.

Huge product range available – We carry all the major hot water brands and water heater models including Rheem, Dux, Rinnai, Aquamax, Bosch, Conergy, Hocking, Apricus, Vulcan, Edwards Solar, Solahart, Everhot and more. This means we can match the right hot water system to the needs of your household. We’ll ensure your new hot water system is energy efficient and ensure you never run out of hot water again.

Save money employing only one tradesperson – did you know that the installation of a new hot water system requires both a licensed plumber and a licensed electrician. Our qualified and licensed technicians can undertake all work required to install your new hot water system without needing to outsource to other tradespeople.  Plumbers who do not specialise in the installation of hot water heaters may need to outsource the electrical work required to another tradesperson, thereby holding up the installation or repair of your hot water system and also adding extra expense due to additional call out fees charged by employing two tradespeople.

Don’t void your water heater warranty – Most water heater manufacturers won’t cover the terms of your warranty if it isn’t installed by a licensed tradesperson.  Your hot water system is an expensive appliance – don’t risk voiding your warranty by installing it yourself or employing the services of someone who isn’t qualified and experienced.

Types of hot water services

Gas Hot Water Heaters

Gas systems make up approximately 48 per cent of hot water heaters in Australia. Gas hot water services include the following types: 

1. Storage gas hot water systems heat the water using a gas burner located underneath the storage tank.  They usually have a continuously burning pilot flame that ignites the main burner when it is needed. Heat is then transferred from the gas burner through the bottom of the cylinder. Some heat also flows from the hot flue pipe into the water. When hot water is drawn off at the top of the tank, cold water enters the tank at the bottom.

2. Instantaneous or continuous flow gas hot water systems, also called continuous flow, don’t have storage tanks and heat water as required.  A gas burner heats the water as it flows through a coiled pipe called a heat exchanger.  The gas burner starts when a hot water tap is turned on, only heating the amount of water that is required instead of continuously heating a full tank.  This is more economical as there is no heat loss caused by storing hot water in a tank.

3. Solar water heaters with instantaneous gas boosting.

For gas hot water service replacement, call us on 1800 266 999 or complete our online enquiry form »

Electric Hot Water Heaters

With 25% of the energy usage in our homes being used to heat hot water, did you know that 52% of this is for electric water heating.

An electric hot water system consists of an insulated storage tank, usually a cylinder, where hot water is kept ready to be used. The water is heated in the tank by electric resistance elements at at pre-set temperature of around 60-80°C.  Electric hot water heaters heat the water the same way an electric kettle heats water, the difference being that your hot water system keeps the water hot at all times.  Over time, the water temperature in the tank decreases through heat losses and usage (called draw-offs).  This results in the tank being refilled with cold water which in turn lowers the overall temperature of water in the tank and needs to be heated once again.

Instantaneous water heaters heat the water on demand. There is not storage tank which makes them ideal for very small spaces like apartments, boats, caravans, etc. While these are not as popular as the more common hot water tank varieties, they still have a place in modern living spaces and we are regularly called to repair and replace them. Instantaneous or,  continuous flow water heaters as they are also called, are designed to deliver a steady stream of heated water.  Each time a tap is turned on, the water is heated instantly by electricity and then flows to the outlet.  Instantaneous electric water heaters typically requires high power inputs, particularly if more than one unit is running at once. In some cases three phase power is required, in others single phase power is adequate. For obvious reasons, instantaneous systems never run out of hot water as the water is heated on demand.  They do not suffer heat loss as there is no storage tank.

Electric hot water system prices »

For electric hot water service replacement, call us on 1800 266 999 or complete our online enquiry form »

Solar Hot Water Systems

Using solar energy to heat water is an effective way to use our abundant sunshine thereby saving energy, money and reducing greenhouse gas emissions. There are two main types of solar hot water systems:

  1. roof top system
  2. split system

Roof top solar hot water systems are perfect if you have ample free roof space. Roof top solar for example, work by mounting the solar panels and storage tank together on the roof. The collectors draw the sun’s energy into fluid in the solar collectors, then the heated fluid circulates the adjacent storage tank.

Split solar hot water systems are perfect if you have limited roof space or you prefer a more streamline look, then a split loline solar water heater may be the best solution. Whilst the solar panels are mounted on the roof, the storage tank is located at ground level.

Helpful articles about solar hot water heaters »

For solar hot water service replacement, call us on 1800 266 999 or complete our online enquiry form »

Contact us for fast hot water service replacement

Hot water is our business! We are your local hot water service replacement experts covering all Sydney suburbs and the Central Coast.  Our trucks are on the road right now, filled with thousands of spare parts and replacement gas, electric and solar systems to ensure you’re back enjoying hot water today.

Call 1800 266 999  Email us  Request a quote

Tags: , , ,